ADSL Connection di Ubuntu

Koneksi internet menggunakan Speedy di Ubuntu,

1. Ketik

~ $ sudo pppoeconf

2. Jawab semua pertanyaan, masukan nomor Speedy dan password.

3. Untuk connect ketik perintah

~ $ sudo pon dsl-provider

4. Untuk disconnect ketik

~ $ sudo poff dsl-provider

Read more...

Wvdial

Aaaaah speedy mati lagi. padahal pengen online. hiks hiks hiks.
Ya sudah lah coba pakai gprs Mentari.

Keterangan.
OS : Ubuntu 8.04
Hp : Nokia N78

Langsung coba tancapkan kabel usb data N78 ke pc dan pilih opsi Pc suite di Hape. Seperti biasanya karena sudah terbiasa kalau ada hardware baru aku langsung ketik perintah dmesg

[26908.552434] usb 5-6: new high speed USB device using ehci_hcd and address 18
[26908.685357] usb 5-6: configuration #1 chosen from 1 choice
[26908.693603] cdc_acm 5-6:1.0: ttyACM0: USB ACM device

ternyata hape saya sudah dikenal di linux dengan nama ttyACM0.
langsung aja edit file /etc/wvdial.conf seperti dibawah ini

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"ip","indosatgprs"
Check Def Route = on
Phone = *99***1#
Idle Seconds = 0
Auto DNS = on
Abort on Busy = off
Abort on No Dialtone = on
Modem Type = USB Modem
Stupid Mode = on
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Username = indosat
Password = indosat
Carrier Check = on

Setelah selesai save dan jalankan perintah wvdialconf

~ $ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- MTK2
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

Now its time for connect internet :D
tanpa ragu langsung saja jalankan perintah wvdial

~ $ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"ip","indosatgprs"
AT+CGDCONT=1,"ip","indosatgprs"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!} } }2}"}&} } } } }#}$@#}'}"}(}"R[04]~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Jan 11 17:54:48 2009
--> Pid of pppd: 9957
--> Using interface ppp0
--> pppd: 0�[06][08]
--> pppd: 0�[06][08]
--> pppd: 0�[06][08]
--> pppd: 0�[06][08]
--> pppd: 0�[06][08]
--> local IP address 10.35.177.37
--> pppd: 0�[06][08]
--> remote IP address 10.64.64.64
--> pppd: 0�[06][08]
--> primary DNS address 124.195.15.98
--> pppd: 0�[06][08]
--> secondary DNS address 124.195.15.100
--> pppd: 0�[06][08]

Sukses !!! sekarang coba lakukan ping

Read more...